Previously, setting up a network was a complicated procedure. Now, with automatic managers it is possible to connect to the Internet without having robust knowledge in the area; however, there is a protocol that must remain enabled: DHCP. If you want to know How to enable or enable DHCP for Ethernet or WiFi in Windows? This article is for you.
How to enable or enable DHCP for Ethernet or WiFi in Windows?
Currently, the process of IP address management it is done automatically. The DHCP protocol does this work through a DHCP client and a DHCP server. The DHCP client sends a request and the DHCP server responds by sending the essential parameters of the different types of existing networks. These are saved and in this way the network is connected.
Next, we explain everything you need to know about this DHCP which is essential to avoid errors in the configuration of any network.
What is DHCP?
DHCP stands for Dynamic Host Configuration Protocol and refers to the dynamic host configuration protocol that is used to assign an IP address to each host so that optimal communication can be established on a network.
In addition to the IP address, DHCP assigns certain essential parameters such as the subnet mask, the DNS address, the address of the Gateway standard and proxy settings.
How does DHCP work?
When IP addresses are assigned manually errors may occur. This occurs because more than one host has the same IP address and this should not happen in any way. For this reason, DHCP works by limiting the time a device preserves an individual IP address.
Additionally, DHCP reduces the complexity of the network administration automating the process and correcting certain technical errors when assigning IP addresses.
Importance of DHCP
DHCP is an efficient extension because it corrects the exhaustion of the IP address range through the dynamic allocation. The configuration parameters stipulated by DHCP are valid for a time defined by the administrator.
Similarly, the DHCP server allows the automatic assignment of fixed addresses and serves the function of simplifying the process of assigning IP addresses.
Another aspect that makes DHCP important is its quick and easy activation. This saves inexperienced users time and effort by imprecisely configuring the network.
Enable or enable DHCP protocol for Ethernet or WiFi in Windows 10
Initially, you must go to the control panel and select the category “Network and Internet” There, you will see the option “Network and Sharing Center”. Then, click on “Change adapter settings” located on the left side of the window.
Later, another window will open showing all available connections. There, you must choose your active connection either Ethernet or WiFi. Afterwards, you will be able to view details about the connection you chose. Click on “Properties” and try to access as administator.
Access to network properties
If you have the administrator permission exclusive for the main user, then you will not have problems when managing the “network properties”. Select “Internet Protocol version 4 (TCP / IPv4)” and click on “Properties”.
A new window will appear with the options “Obtain IP address automatically and” Obtain DNS server address automatically “; both must be selected in order to enable the DHCP protocol. Finally, you must click the button “To accept”.
Check if DHCP was enabled from CMD
To check if the DHCP server was configured properly you must go to the Windows command processor after typing cmd from the start button. At the system console, type “Ipconfig / all” and in this way you will be able to view the status of the network adapter.
On the other hand, if you have questions about how to install and configure a DHCP server in Windows Server, you can find out through the previous link.