Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding

Your DNS server is not responding? In this post we will show you how to fix Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding error on Windows 11/10.

When you try to connect to the Internet – but cannot then you may run the Network Diagnostic Troubleshooter to troubleshoot the issue. But at the time, the Troubleshooter itself may throw up the following error message:

Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding

DNS Server is not responding

If you face DNS issues or problems on your Windows 10/8/7 computer, here are a few things you could try to resolve the Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding error:

1. Change the DNS server address manually
2. Use alternative DNS
3. Enter Physical address in the Network adapter setting
4. Disable your Firewall.

Fix DNS issues & problems

Before you begin, backup your Router settings and update the firmware of your Router. Check the Router manual for more information on this subject.

1] Change the DNS server address manually

The first thing to try is to change the DNS server address manually. Follow these instructions-

Go to Start and Click on Control Panel

Open up Network and Internet and go to the Network and Sharing Center.

Click on Change adapter settings.

Now you’ll see the list of Network adapters. Select the Network adapter that you are using and right-click on it and open Properties.

Click on “Internet Protocol Version 4 (TCP/IPv4)”

You’ll see the Internet Protocol Properties.

Select “Use the Following DNS server address:”

• Enter the Preferred DNS address:   208.67.222.222
• Enter the Alternative DNS address: 208.67.220.220

Also, select Validate settings upon exit check-box.

Click OK, and exit.

Now you have to enter the same DNS address in the Router configuration as well. You may refer to the Router manual for more information on this.

Related: Windows can’t communicate with the device or resource (Primary DNS Server).

2] Use alternative DNS

If this does not help, you may try to install and configure OpenDNS and see if that helps.

3] Enter Physical address in the Network adapter setting

The next suggestion I have to make is to enter the Physical address in the Network adapter setting and seeing if that works for you.

To do this-

• Go to Start and type in CMD and Hit Enter
• In command prompt type in IPCONFIG /ALL
• Look for your network adapter
• Write down the Physical Address. According to this screenshot, it’s 78-DD-08-F1-DF-B0 in my case.
  

Now go to Start and type in NCPA.CPL. Right Click on your Network adapter and go to Properties.

Select Configure.

Then follow these steps-

1. Click on Advanced Tab and select Network address
2. Select the radial button Value
3. Type in the physical address you wrote down before, (In my case it was 78-DD-08-F1-DF-B0) Remove the dashes when you type in, i.e., 78DD08F1DFB.
4. Click OK
5. Reboot the System.

Now look up your Network adapter model and go to the manufactures website and find the appropriate drivers and update the Drivers and see if that resolves your issue.

Related: How to resolve DNS issue on Windows 11/10.

4] Disable your Firewall

The last suggestion I have to make is to disable your Firewall completely and see if that helps your connection.

Hope something helps.

These resources may also interest you:

1. How to flush Windows DNS Cache
2. How to change DNS settings in Windows
3. Manage web browsing speed by changing DNS settings
4. DNS Cache Poisoning and Spoofing
5. Check if your DNS settings have been compromised.